Gavita Master Controller EL1

Gavita Master Controller EL1

The Gavita Master Controller offers maximum control of your grow room climate and is easy to use at the same time.

Dimmable ballasts have been on the market for several years and are used by many growers. They can be dimmed and the light intensity can thus be reduced, for example in the growing phase when the plants can also manage with a lower light intensity.

The Master Controller is easy to install, it just needs to be plugged in, the ballasts are switched to EXT (external control). The low-voltage control line must be looped through from the controller to all ballasts (plug & play).

Just press a few buttons on the controller and you get complete control over all connected ballasts. Master Controller can do all this and much more. The ballasts are plugged directly into the socket and are in stand-by mode. They are activated by a signal from the controller. When the ballasts are switched on, no inrush current occurs.

It is recommended to use the Master Controller EL1 in combination with ballasts from the Gavita e-series.

Details:

• 5-language user interface (English, French, German, Spanish, Dutch)
• the display shows all warnings, settings and states
• For a good overview, each output channel has LEDs
• Automatic switch-off in case of dangerous overtemperature
• Offers main and auxiliary channels that are synchronised with each other
• the output power of the ballasts can be displayed in watts or as a percentage
• Setting for "sunrise and sunset", in which the lamps are slowly raised and lowered at the start and at the end
• Equipped with temperature sensor
• at preset temperature, the lamps are automatically dimmed if there is a risk of damage to the plants
• in the event of a complete failure of the fans, the master controller switches off all connected units and activates the alarm contact, a warning LED lights up.
• Suitable for up to 15A
• 1 output channel
• 24 h timer
• suitable for ballasts with 400, 600, 750 and 1000W
• Number of ballasts per output: 40
• Warranty: 3 years
• Voltage: 120V
• two-pole circuit breaker
• High-quality green OLED display with 2-line full text menu
• No need for a switchboard
• Output power setting: 50-100%
• Simple and safe installation (low voltage unit)