digital fan speed controller Evolution

digital fan speed controller Evolution

• Fully programmable
• Temperature and humidity control
• Control of heaters up to 3KW
• Advanced control algorithms
• up to 12A
• Live display for temperature and humidity
• max fan speed control, min fan speed control
• 2 sensors: 1x temperature, 1x humidity, 5m cable each
• Has interface to Evolution Co2 controller
• 3 years manufacturer's warranty
• Detailed instructions with many pictures and manual in English and German

Temperature and humidity are two of the most important environmental factors in your grow room. All plants have a certain temperature and humidity at which they can grow minimally or maximally. The climatic conditions in the grow room are crucial for the healthy growth and the growth rate of your plants. If the humidity or temperature is not right, this can lead to slow and weak growth of the plants, as well as mould and other diseases if left untreated.

The digital Evolution Control System constantly monitors the humidity and temperature in the grow area. It constantly adjusts the fan speed to keep the growing conditions optimal for the plants. In an optimal environment, plants grow much faster, get bigger and produce increased yields.

Again and again, beginners in particular make the mistake of paying too little attention to the correct ventilation of their grow room. Problems are then pre-programmed and difficult to rectify. The rule of thumb for grow boxes and greenhouses is: all air from the grow room should be exchanged within 5 minutes.

This control can control multiple fans up to a total load of 6A.

Furthermore, the Fan-Speed Controller can additionally control heaters up to a load of 3KW, so it is compatible with most fan heaters and small heaters.

Technical data:

• Min. fan speed: 20%
• Fan speed setting range: 25-100%
• Max. fan speed: 80% (default)
• Fan speed setting range: 0-100%
• Temperature: Default 26° C
• Temperature range: 10-35° C
• Humidity default: 60%
• Humidity measuring range: 40-80%.
• 220V
• 20W
• Max. total load: 3KW (12A)