AC-EC LCD fan controller for 2 fans 2 x 5A (GSE)

AC-EC LCD fan controller for 2 fans 2 x 5A from GSE

This AC-EC fan controller with LCD display and rotary knob enables easy and quick setting of all values and reading of all information output by the fan, such as actual setpoint speed, temperature, humidity (day / night), fan negative pressure and speed (revolutions per minute) of the EC output fan. The built-in light sensor in the probe detects day / night modes. The controller is designed for 2x 5A/230V for output fans. 2 internal temperature sensors prevent overheating on the heat sink and processor side. The AC-EC fan controller is supplied with a 1.5 m power cable and a 4 m sensor cable. The controller is ready to use immediately. You can programme 15 individual settings with the rotary knob.

• Two RJ45 connections and one 0-10V or PWM (pulse width modulation) connection
• Temperature setting for day/night
• Minimum speed setting for day/night
• Maximum speed setting for day/night
• Negative pressure setting
• Switch sensor level
• LCD screen with graphic and digital display of speed / speed constant
• Temperature display
• Humidity display constant
• Set point selectable not constant, via input keys
• Sizes and technical data:
• Housing: 130 x 80 x 70 mm
• Designed for: 2 x 1000W
• Volt: 230V / 50HZ
• 2x 5A
• digital sensor 5V measures temperatures from -55 ° C to + 125 ° C
• 0.5 ° C Accuracy from -10 ° C to + 85 ° C
• Humidity Accuracy ± 4.5% rh
• Protection class: IP54